Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on the Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Brake pads

First, position the car on a lift, raise it to a comfortable height to work on, and proceed to remove the wheel corresponding to the brake pads to be replaced. At this point, using the appropriate tools, remove the brake caliper by acting on the two pins (one at the top inside and one at the bottom inside of the caliper) that secure it in place. Now, using a screwdriver, remove the piece that holds the pads in position and take out the pads themselves. Insert the new pads in position and reassemble everything by repeating the same operations shown in the images but in reverse order.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Pads on a Citroen C4 Picasso
Replacing the Rear Brake Pads on a Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Replacing the rear brake pads on a Citroen C4 Picasso? Here’s how to do it. Lift the car on a column lift to the desired height, then remove the whee…
Removing Brake Pads on C4 Picasso
Removing Brake Pads on C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) How to replace the front brake pads on a Citroen C4 Picasso? Lift the car and remove the wheel using a telescopic spanner. Identify the caliper that …
How to Change the Rear Brake Pads on the Citroen C4 Picasso
How to Change the Rear Brake Pads on the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) In this video, we will see how to change the rear brake pads on the Citroen C4 Picasso. First, open the brake fluid reservoir located in the engine c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos