Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spark Plugs on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Spark plugs

Want to remove the spark plugs from your Citroen C3? In this video, learn in detail how to proceed: pull the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Disconnect the power wiring located on the coil holder, then unscrew the securing bolts with the appropriate socket wrench. Remove the coils from the engine head. Unscrew the spark plugs with a socket wrench (extract them from the head) and take the new spark plug, inserting it into the engine head with the socket wrench. Finally, reassemble the plastic cover panel over the engine head.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Spark Plugs in a Citroen C3
How to Replace Spark Plugs in a Citroen C3
Citroen C3 (2009-2016 / SC) In this video, you will learn how to remove and replace the spark plugs in a Citroen C3 (the procedure is similar for other Citroen and Peugeot model…
Replacing the Glow Plugs on the Citroen C3 1.4 HDI
Replacing the Glow Plugs on the Citroen C3 1.4 HDI
Citroen C3 (2009-2016 / SC) Today, we will see the main instructions useful for removing and replacing the glow plugs on the Citroen C3 1.4 HDI. First, open the engine bonnet an…
Replacing the Spark Plugs on the Citroen C3 1.1i
Replacing the Spark Plugs on the Citroen C3 1.1i
Citroen C3 (2002-2009 / FC, FN) In this tutorial, learn how to remove and replace the engine spark plugs on the Citroen C3 1.1i by following these simple steps. First, open the bonn…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos