Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel and Airbag from a Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Steering wheel

To remove the steering wheel from a Citroen Berlingo, you must first remove the airbag. To do this, there are three slots on the back of the steering wheel that allow access, using a screwdriver, to the spring that holds the airbag in place. Carefully lever with the screwdriver to release the clips corresponding to the three holes, and then you can proceed to remove the airbag unit (after disconnecting the electrical supply). At this point, the bolt that secures the steering wheel in place becomes visible and accessible. Simply unscrew the bolt using a suitable spanner, and you can then remove the steering wheel.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the steering wheel airbag in the Citroen Berlingo?
How do you remove the steering wheel airbag in the Citroen Berlingo?
Citroen Berlingo (2008-2018 / MK 2) This video guide is very useful for those who decide to disassemble the steering wheel airbag of a Citroen Berlingo themselves. As you can see, the s…
How to disassemble the steering wheel of the Citroen Berlingo
How to disassemble the steering wheel of the Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) Today we will explain how to disassemble the steering wheel on Citroen Berlingo and Peugeot Partner vehicles. To perform this operation, it is necess…
How to disassemble the airbag and steering wheel of the Citroen Berlingo
How to disassemble the airbag and steering wheel of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Today we will explain how to remove the airbag and steering wheel from a Citroen Berlingo vehicle. To perform this operation, we need to use a flat-t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos