Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the BSI module of Citroen C5

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Checks and maintenance

In this guide we will see the instructions that will allow us to reset the BSI module of the Citroen C5, in simple steps. First of all, we get on board the car and start the instrument panel; then we lower the driver's side window and then get out of the car and open the rear hatch, waiting three minutes as shown in the video. At this point, we disconnect both battery terminals (positive and negative), keeping them disconnected for another three minutes; this way we will have reset the BSI module!

Posted on 26 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the BSI Unit in the Citroën C5?
Citroen C5 (2008-2017 / MK 2, RD, X7) To reset the BSI unit in the Citroën C5, connect a diagnostic tool to the vehicle's OBD port, which is located in the lower left part of the dashboar…
How to delete the travel data from the onboard computer on a Citroen C5 MK2
How to delete the travel data from the onboard computer on a Citroen C5 MK2
Citroen C5 (2008-2017 / MK 2, RD, X7) In this video we will see how to delete travel data from the on-board computer of a Citroen C5, also known as BSI (Body Computer) which is basically …
Removing the Radio from the Citroen C5 MK1
Removing the Radio from the Citroen C5 MK1
Citroen C5 (2000-2008 / DC, MK 1) In this short and simple video, you will learn how to remove and replace the original radio of the Citroen C5 first series, following the instruction…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos