Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Service warning light

Video tutorial

How to reset the service light on a Citroen Xsara Picasso. This operation is very simple: enter the vehicle, turn on the ignition with the appropriate key (you will see the maintenance message), turn off the ignition and press the button on the left.

Turn the ignition back on and wait for the countdown (release the button when the seconds finish). Finally, turn off the ignition with the appropriate key, then turn it back on to check the maintenance status (the light should no longer be illuminated).

Always remember to make changes to the onboard computer while the vehicle is stationary and turned off.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
How to reset the service light on the Citroen Xsara Picasso
How to reset the service light on the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Today we will explain how to reset the service light, related to the car service on a 2006 Citroen Xsara Picasso in less than two minutes. To reset t…
Resetting the Service Light on a Citroen Xsara Picasso
Resetting the Service Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Below are the instructions to reset the service light on a Citroen Xsara Picasso. First, get in the vehicle and press and hold the button located at …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos