Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel pump in the Citroen C1?

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Fuel pump

In this tutorial we can see how to replace the fuel pump in the Citroen C1, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the fuel tank cap to release the internal pressure and lift the rear seat. Next, remove the central cover, disconnect both the two tubes and the power connector, and unscrew the outer ring using a large flat-tipped screwdriver. At this point, all that remains is to remove the old pump, insert the replacement, and reassemble everything following the reverse procedure.

Posted on 26 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel pump / float on the Citroen C1
How to replace the fuel pump / float on the Citroen C1
Citroen C1 (2005-2014 / MK 1) In this video tutorial we will see how to remove and replace the fuel pump or the floating pump on the Citroen C1 first series, but also on the Peuge…
Assembly of fuel pump and float Citroen C1 - Peugeot 107
Assembly of fuel pump and float Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) In this video tutorial we will see how to mount the floating fuel pump of a Citroen C1 and a Peugeot 107, as the same models. The fuel pump is locate…
How to replace the windshield washer pump in the Peugeot C1?
How to replace the windshield washer pump in the Peugeot C1?
Citroen C1 (2005-2014 / MK 1) In this tutorial, we can see how to replace the windshield washer pump in the Citroen C1, an extremely simple and fast operation. First of all, we li…

Other guides you may be interested in

Removing the Ignition Switch from a Mercedes C-Class W204

In this short video, you will see how to remove the ignition switch from a Mercedes C-Class (Mercedes W204). First, remove the chrome trim (if present) around the ignition switch by prying it off with a screwdriver (preferably something soft to avoid damaging the dashboard). Next, remove the plastic trim around the gauge cluster where the tachometer and speedometer are located, as well as the rectangular plastic trim surrounding the steering wheel. Simply unclip it. Now, press and push the ignition switch to release it from the housing, and you're done!

Watch the video!


by ScegliAuto

More videos