Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light on the Citroen Jumper.

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

The following information will show us the procedure to reset the maintenance service light for the engine oil change of the Citroen Jumper, as well as the Peugeot Boxer and Fiat Ducato. First, we turn on the instrument panel and press the right button of the instrument panel until the "CFG" message appears on the small display; then we set the configuration to position 3, wait a few seconds, and turn off the instrument panel, as shown in the video.

Turn on the instrument panel again to complete the service reset operation!


Posted on 6 April 2025 by ScegliAuto


Related tutorials

How to reset the service light on a 2006 Citroen Jumper car
How to reset the service light on a 2006 Citroen Jumper car
Citroen Jumper (1994-2006 / MK 1) Today we will explain how to independently reset the service light, related to the car service of the 2006 Citroën Jumper. To reset the light, we nee…
How do you reset the Service light on the Citroën Jumper?
How do you reset the Service light on the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) The Service light that appears on the instrument panel of the Citroën Jumper can be reset by turning on the instrument panel, turning the key in the …
Resetting the Service Light on the Citroen Jumper
Resetting the Service Light on the Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) Today, we will go through the instructions to reset the service light for the routine maintenance oil change on the Citroen Jumper. First, get into t…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos