Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to completely disable the start & stop on the Citroen Jumper

Model: Citroen Jumper MK 3 - Years 2014-2024
Part: Checks and maintenance

In this video we can see how to permanently deactivate the Start & Stop feature on the Citroen Jumper, as well as on the Peugeot Boxer and Fiat Ducato. It is a very simple operation and it is always possible to revert back. We need to lift the floor located under the driver's footwell (left-hand drive); in the compartment we find the battery where, next to the negative pole (the black one) we find an electrical connector. Simply disconnecting it will deactivate the function. However, we must warn that this deactivation will cause a warning light to turn on and remain constantly on. Depending on how the vehicle is used, it can be very annoying.

Posted on 10 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD2 port located on the Citroen Jumper?
Where is the OBD2 port located on the Citroen Jumper?
Citroen Jumper (2006-2014 / MK 2) If you are curious to find out where the OBD2 port is located in your Citroen Jumper, all you need to do is carefully read the steps described in the…
How to Reset the Service Light on a Citroën Jumper
How to Reset the Service Light on a Citroën Jumper
Citroen Jumper (2006-2014 / MK 2) To reset the Service light on a Citroën Jumper, turn on the ignition without starting the vehicle. Then, press the accelerator pedal and simultaneous…
How to reset the Service light in the Citroën Jumper?
How to reset the Service light in the Citroën Jumper?
Citroen Jumper (2014-2024 / MK 3) In the Citroën Jumper, to reset the Service light, turn on the instrument cluster without starting the vehicle; then, press the accelerator pedal whi…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos