Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the car radio of a Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Car stereo

In this video tutorial you will see how to disassemble the car radio in a Citroen Berlingo. The removal requires the removal of the front frame and some torx screws, so make sure you have a torx screwdriver and a plastic lever with you. First of all, remove the radio frame and then the gray mask, to do this use a plastic lever to apply force to the sides of the frame and also to the back; then gently lever from both sides until it unclips, start levering from the bottom. Once the frame is removed you will see 2 or 4 torx screws, unscrew them all and remove the radio and disconnect the connectors.

Posted on 11 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the radio of the Citroen Berlingo
How to remove the radio of the Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) Following these short and simple instructions, we will see how to disassemble and replace the standard radio of the Citroen Berlingo. First of all, w…
How to disassemble the radio of the Citroen Berlingo 2
How to disassemble the radio of the Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) In the following guide dedicated to all of you who own a Citroen Berlingo Mk2, we will discover the steps you need to take to correctly and safely re…
How to Replace the Radio in a Citroën Berlingo?
How to Replace the Radio in a Citroën Berlingo?
Citroen Berlingo (2018-2026 / MK 3) To replace the radio in a Citroën Berlingo, use a tool to pry off the upper part of the central dashboard panel, disconnecting the connectors as well…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos