|
Do it yourself
| |||
| ||||
How to check the fluid levels of the Citroen C3 MK1
Model: Citroen C3
FC, FN
- Years 2002-2009
In this video, we will see how to check the fluid levels on a Citroen C3 MK1. Let's start with the oil level: the car must be stationary for at least half an hour on a flat surface. Look for the oil level indicator and remove it from its housing. Clean it and then put it back in place, remove it again and check that the level is close to the "max" mark. If it is lower, add enough oil from the refill cap to restore the level; the oil must be of the specification indicated by the manufacturer in the owner's manual. It is also important that it is of excellent quality. Next, check the coolant reservoir. Again, we must make sure that the level is just below the "max" mark. We must top up with fluid of the same color as that in the tank, never with tap water. Also check the brake fluid reservoir: this fluid theoretically never gets consumed; if the level has dropped below the maximum, it means that the brake pads are wearing out, so top it up, but schedule a visit to the mechanic. Finally, check the windshield washer fluid reservoir: add the appropriate fluid or demineralized water, never tap water as the lime could damage the pipes and cloud the windshield.
Posted on 13 June 2025 by ScegliAuto
Video tutorial
Related tutorials
Citroen C3
(2009-2016 /
SC)
One of the maintenance operations that must be frequently performed on a car is checking the fluid levels and, if necessary, topping them up. Today w…
Citroen C3
(2009-2016 /
SC)
Let's see in this video how to check the fluid levels of the Citroen C3 MK2 1.4 HDi. We need to open the hood and ensure that the vehicle is on a fla…
Citroen C3
(2002-2009 /
FC, FN)
In this video, see how to replace the brake fluid on a first-generation Citroen C3 or simply top up the fluid. First, open and lift the bonnet. To to…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.067
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |