|
Do it yourself
| |||
| ||||
How to check the levels of the Citroen C3 MK 2 1.4 HDi.
Model: Citroen C3
SC
- Years 2009-2016
Let's see in this video how to check the fluid levels of the Citroen C3 MK2 1.4 HDi. We need to open the hood and ensure that the vehicle is on a flat surface: first, we need to check the engine oil level using the dipstick. Pull it out and clean it, then put it back in place and check it again: the level should be near the maximum. If it isn't, add a bit of oil as specified by the manufacturer. We also check the coolant level: this should also be near the maximum, and if necessary, we can add more, as long as it is the same color as the fluid present in the reservoir. Now it's time for the brake fluid: this fluid does not get consumed, but if it is below the maximum, it means that the brake pads are wearing down. So, let's add some brake fluid and schedule a check of the pads themselves. We should also add windshield washer fluid. Be careful not to add tap water, as it could damage the ducts and the windshield.
Posted on 29 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Citroen C3
(2002-2009 /
FC, FN)
This guide outlines the steps to remove and replace the timing belt on a Citroen C3 1.6 HDI. Remember, the timing belt should be replaced every 112,0…
Citroen C3
(2009-2016 /
SC)
This guide shows you how to remove and replace the coolant thermostat on the Citroen C3 1.4 HDI. First, open the bonnet and start by removing the bat…
Citroen C3
(2009-2016 /
SC)
Today we will discover the instructions that will allow us to disassemble and replace the battery of the Citroen C3 1.4 HDi. First, let's open the ca…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.137
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |