Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the third brake light on the Citroen C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part:

Today we will explain how to replace the third brake light of the Citroen C3 Picasso. To perform this operation, we should use a flat-head screwdriver. We open the trunk of the car and remove the clips protecting the screw holes located in the headlight. After removing the clips, we insert the flat-head screwdriver into the holes and unscrew the screws. Disconnect the headlight connector and insert the new bulb. Screw in the screws and mount the clips. Turn on the reading lights to test the headlight operation. If it does not work, it may be necessary to replace the related fuse.

Posted on 29 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the third brake light bulbs on the Citroen C3 Picasso
How to change the third brake light bulbs on the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) In this video tutorial we will see the steps that will allow us to remove the third stop and replace the bulbs on the Citroen C3 Picasso. First we op…
How to replace the rear light of the Citroen C3 Picasso
How to replace the rear light of the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) The following video tutorial will show you the steps to be carried out independently to replace the left rear headlight of a Citroen C3 Picasso when …
Disassembly and replacement of the rear light of the Citroen C3 Picasso
Disassembly and replacement of the rear light of the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Today we will discover the procedure for disassembling and replacing the rear light and its bulbs of the Citroen C3 Picasso. First, let's open the re…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos