Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the exhaust muffler of the Citroen C1 1.0

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Exhaust muffler

See other generations:
Video tutorial

In this guide, we will see the instructions that will allow us to disassemble and replace the exhaust of the Citroen C1 1.0, as well as the Peugeot 107. First, lift the vehicle and start disconnecting the clamp located between the exhaust manifold and the exhaust, cutting only if it is impossible to remove it; once the exhaust system and the catalytic converter are disconnected, it will be possible to remove it, as shown in the video.

At this point, we carry out the repair or directly replace the exhaust, installing it correctly, following the video tutorial until the end!


Posted on 8 July 2025 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Citroën C1?
How to Replace the Exhaust on a Citroën C1?
Citroen C1 (2005-2014 / MK 1) To replace the exhaust on a Citroën C1, lift the vehicle to access the underside. First, loosen all the bolts securing the exhaust supports. Then, pr…
How to Turn Off the Engine Warning Light on the Citroen C1
How to Turn Off the Engine Warning Light on the Citroen C1
Citroen C1 (2005-2014 / MK 1) If you have an engine warning light illuminated on the dashboard of your Toyota Aygo/Citroen C1/Peugeot 107 first generation, a common cause is the o…
How do you replace the headlight bulb of the Citroën C1?
How do you replace the headlight bulb of the Citroën C1?
Citroen C1 (2005-2014 / MK 1) The headlight bulb of the Citroën C1 can be replaced by opening the hood, so that it is possible to have access to the components located inside the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos