Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located on the 2017 Citroen C3 Picasso?

Model: Citroen C3 Picasso MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

This video is currently unavailable

If you own a Citroen C3 Picasso (2017) and want to find out where the OBD port is located inside the vehicle, all you have to do is follow the steps described below. First of all, make sure the car is safely parked on a flat surface, then open the door on the passenger side and enter the cabin.

At this point, you need to open the glove compartment and remove the plastic protective panel with your own hands. Finally, locate the OBD port you were looking for and you're done.


Posted on 29 August 2025 by ScegliAuto


Related tutorials

Where is the OBD port located in the Citroen C3 Picasso?
Where is the OBD port located in the Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) If you don't know where the OBD port of your Citroen C3 Picasso is located, then all you have to do is read the following guide and follow the few si…
Where is the OBD port of the Citroen C3 Picasso located?
Where is the OBD port of the Citroen C3 Picasso located?
Citroen C3 Picasso (2008-2017 / MK 1) If you do not know the location of the OBD2 port in your Citroen C3 Picasso, do not worry because in this new mini guide of ours you will find the de…
Programming the Key Remote for the Citroen C3 Picasso
Programming the Key Remote for the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) This video shows how to program the key remote for the Citroen C3 Picasso. To program the remote, you will need the old physical key and a programmin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos