Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the service light of the Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

If the maintenance light on the central display of the instrument panel of your first generation Citroen Berlingo continues to stay on even after performing the vehicle's service, then you need to manually reset the light. First, get into the driver's seat inside the cabin, then press and hold the button located to the right of the display and near the speedometer.

At the same time, start the instrument panel and after about ten seconds release the button to complete the service light reset procedure.


Posted on 2 September 2025 by ScegliAuto


Related tutorials

How to reset the service light on the 2015 Citroen Berlingo
How to reset the service light on the 2015 Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) The service light on 2015 Citroen Berlingo vehicles turns on when it is necessary to perform maintenance on the vehicle or when it is necessary to re…
How do you reset the Service light on the Citroën Berlingo?
Citroen Berlingo (2018-2026 / MK 3) It will be possible to reset the Service warning light on the Citroën Berlingo instrument panel by pressing and holding the button located in the cen…
How to reset the service indicator on a Citroen Berlingo MK2
How to reset the service indicator on a Citroen Berlingo MK2
Citroen Berlingo (2008-2018 / MK 2) In this video, we will see how to reset the service light on a Citroen Berlingo MK2 van; first of all, make sure to properly close the doors, the fro…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos