Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Citroën Jumper?

Model: Citroen Jumper MK 2 - Years 2006-2014
Part: Fuse box

The specific fuse box of the Citroën Jumper installed on the vehicle is responsible for containing the fuses that regulate the operation of the devices installed on the vehicle: this will be located inside the cabin. In order to find it, you will need to remove the panel of the small upper glove compartment located on the passenger side. By removing the panel, you will be able to identify all the fuses in the box below: inside there will be the fuse for the low beam headlights, the cabin fan, the instrument panel, etc. Each fuse can be replaced with one of similar amperage.

Posted on 13 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Citroën Jumper?
Where are the fuses located in the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) In the Citroën Jumper, all fuses are located within dedicated fuse boxes inside the vehicle: there are four in this type of vehicle. The first two ar…
Where are the fuses located in the Citroën Jumper?
Where are the fuses located in the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) The fuse boxes of the Citroën Jumper are responsible for containing the fuses that regulate the devices found on the vehicle: in this type of vehicle…
Where to Find the Fuses for the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) The fuses for the Citroën Jumper are located within the designated fuse boxes found in the vehicle: this model has four. The first two are located be…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos