Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Citroen C4 Picasso.

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Headlight bulb

Today's instructions will allow us to disassemble and replace the low beam bulb of the front headlight of the Citroen C4 Picasso. First, let's open the vehicle's hood and begin by removing the plastic protective cover for the bulbs; then we disconnect the electrical connector of the light and unclip the metal spring to remove the bulb inside, as shown in the video. At this point, we replace the bulb with a new one of the correct type and with the same fitting; we secure the spring and check the light's operation, replacing the other bulb in the same way.

Posted on 21 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Citroen C4 Picasso
How to replace the rear headlight bulb of the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Replacing the rear headlight bulb on the Citroen C4 Picasso requires a few more steps than normal replacement but it is still a simple task to do on …
Replacement of the front headlight bulb of the Citroen C4 Picasso.
Replacement of the front headlight bulb of the Citroen C4 Picasso.
Citroen C4 Picasso (2006-2013 / MK 1) Today we discover the necessary guide on how to disassemble and replace the headlight bulb of the Citroen C4 Picasso. First of all, we open the hood …
Replacing Front Headlight Bulb on Citroen C4 Grand Picasso
Replacing Front Headlight Bulb on Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Are the headlight bulbs on the C4 Grand Picasso blown? Let's see how to change them from the front headlight. Open the front bonnet by pulling the le…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos