Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the location of the EOBD port on the Citroen Berlingo 1.6 HDi?

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Checks and maintenance

Let's see in this video where the EOBD (European On Board Diagnostic) connector is located on the Renault Berlingo 1.6 HDI. It is the port used to communicate with the ECU and is found behind a cover located on the lower left side of the steering wheel. It allows you to view many data points from the engine sensors, such as RPM, coolant temperature, lambda sensor values, and many others. The EOBD was primarily created to monitor systems related to emissions and allows for checking that the vehicle's pollution control systems are functioning properly. From here, we can reset error codes after a repair, and with the right tools, we can also update the vehicle's firmware.

Posted on 25 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the turbocharger of the Citroen Berlingo 1.6 HDi
How to replace the turbocharger of the Citroen Berlingo 1.6 HDi
Citroen Berlingo (2008-2018 / MK 2) Below we will see the main instructions that will allow us to disassemble and replace the turbocharger of the Citroen Berlingo 1.6 HDi. First, we ope…
How to replace the diesel filter of the Citroen Berlingo 1.6 HDI
How to replace the diesel filter of the Citroen Berlingo 1.6 HDI
Citroen Berlingo (2008-2018 / MK 2) In this short guide we will see the instructions that will allow us to disassemble and replace the diesel filter of the Citroen Berlingo 1.6 HDI. Fir…
How to reset the automatic transmission control unit of the Citroen Berlingo 1.6 HDi
How to reset the automatic transmission control unit of the Citroen Berlingo 1.6 HDi
Citroen Berlingo (2008-2018 / MK 2) In this short guide, we will see how to reset the automatic transmission control unit of the Citroen Berlingo 1.6 HDi. First of all, we get into the …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos