|
Do it yourself
| |||
| ||||
Replacing the Diesel Filter on Citroen C4 Picasso
Model: Citroen C4 Picasso
MK 2
- Years:
2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Video tutorial
Today, let’s see how to replace the diesel filter on a second-generation Citroen C4 Picasso. Start by opening the engine bay and removing the engine cover; this will expose the diesel filter that needs replacing. Continue the procedure by disconnecting the three hoses from the filter and the electrical connector as shown in the video, then unscrew the two securing screws of the filter using an 8mm spanner to remove it from its seat. Now, detach the cover from the diesel filter by unscrewing the three upper screws with a T15 Torx key and turning the electrical connector counterclockwise; once the cover is removed, take off the old sealing gasket and fit it onto a new filter. Finally, refit the diesel filter by following the reverse procedure.
Posted on 15 March 2026 by ScegliAuto
Related tutorials
Citroen C4 Picasso
(2013-2022 /
MK 2)
This guide provides instructions for replacing the diesel filter on the Citroen C4 Picasso 1.6 HDi. First, open the bonnet of the vehicle and locate …
Citroen C4 Picasso
(2013-2022 /
MK 2)
In today's tutorial, you will see how to remove and replace the diesel filter on the second generation Citroen C4 Grand Picasso with a 1.6 eHDI engin…
Citroen C4 Picasso
(2013-2022 /
MK 2)
To replace the diesel filter on a Citroën C4 Picasso, open the bonnet to access the components inside the engine bay. Detach the plastic cover from t…
Other guides you may be interested in
|
How to Open the Hood of the BMW X3
Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.255
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
