Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Speed Warning on Citroen C3

Model: Citroen C3 Cc21 - Years 2024-2026
Part: Onboard computer

See how to disable the audible speed warning on the Citroen C3: first, note that the system is mandatory by law, being a safety device. It can be deactivated for the current journey, but it automatically reactivates with each start. However, it is possible to exclude it for the current journey by simply pressing the button located on the control panel to the left of the steering wheel, at the bottom of the dashboard. There are three/four buttons (depending on the version) in sequence, and the one of interest is the first on the left. This way, the beep that sounds every time you exceed the speed limit will no longer be heard, while the visual warning remains active.

Posted on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you set the cruise control in Peugeot and Citroen cars?
How do you set the cruise control in Peugeot and Citroen cars?
Citroen C3 (2009-2016 / SC) Without a doubt, cruise control is a great tool because it allows you to set a specific cruising speed and avoid the risk of exceeding, for example, …
How to reset the tire pressure warning light on the Citroen C3
How to reset the tire pressure warning light on the Citroen C3
Citroen C3 (2016-2023 / SX, SY) The following instructions will allow us to reset the tire pressure warning on the Citroen C3; before resetting the TPMS sensors, it is necessary for…
How to change the BSI of a Citroen C3
How to change the BSI of a Citroen C3
Citroen C3 (2016-2023 / SX, SY) In this video we see how to change the BSI of a Citroen C3: the BSI unit centralizes and processes information from three networks: CAN HS network, w…

Other guides you may be interested in

Removing Door Panel on Volkswagen Polo

First, remove the cover of the central handle by prying it open with a plastic wedge (do not use a metal tool to avoid damaging the plastics) and disconnect the connector for the window switch. At this point, unscrew the two screws that are now exposed. Once you reach this point, unscrew the other screw located at the bottom of the panel as shown in the video. Done! Now, pry with a trim tool around the entire gap of the panel and remove it. Disconnect the cables and you're done. Proceed in reverse for reassembly.

Watch the video!


by ScegliAuto

More videos