Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil and Oil Filter on the Citroen C Crosser

Model: Citroen C Crosser MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Engine oil

Video tutorial

To replace the used oil and oil filter on your Citroen C Crosser, the steps are very simple and quick as follows. First, lift the car onto ramps to access the oil sump.

Now unscrew the sump plug and, using a container, let the used oil drain out. Next, move to the filter, which is located just above the sump. As shown in this video, the filter is positioned in a slightly awkward but workable location.

Remove the filter and proceed with replacing both the filter and, if necessary, its seal. Once finished, replace the plug in the sump and you can finally add new oil to your car.


Posted on 31 May 2026 by ScegliAuto


Related tutorials

How is the service performed for the Citroen C Crosser?
How is the service performed for the Citroen C Crosser?
Citroen C Crosser (2007-2012 / MK 1) No different from other cars, the Citroen C Crosser is equipped with a service light, and when it comes on, it is necessary to perform a service by c…
How to replace the cabin air filter of the Citroen C Crosser.
How to replace the cabin air filter of the Citroen C Crosser.
Citroen C Crosser (2007-2012 / MK 1) Today we will explain how to independently replace the cabin air filter of the Citroen C Crosser. The filter is located behind the glove compartment …
How to replace the cabin air filter of the Citroen C Crosser
How to replace the cabin air filter of the Citroen C Crosser
Citroen C Crosser (2007-2012 / MK 1) To replace the cabin air filter of the Citroen C Crosser, we need to get on board the vehicle and sit on the passenger seat. Then we need to open the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos