Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of a Citroen C3

Model: Citroen C3 SY, SX - Years 2016-2023
Part: Body

In this video, see some explained operations, such as how to open the bonnet on our Citroen C3. Pull the lever located at the bottom left of the dashboard, then lift the bonnet slightly and pull the release lever to the left. Once the bonnet is released, lift it upwards and secure it with the prop rod. Now that you have opened the bonnet, you can perform your necessary maintenance. To close the bonnet: remove the safety rod and let the bonnet drop from a minimal height. Ensure that the bonnet is properly closed.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet of a Citroen C3
How to Open the Bonnet of a Citroen C3
Citroen C3 (2016-2023 / SY, SX) Do you want to open the engine compartment of a Citroen C3? Here’s how to lift the front bonnet for maintenance inside the compartment. Pull the leve…
How to Open the Bonnet on a Citroen C3
How to Open the Bonnet on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How to open the front bonnet for maintenance? Here’s how to do it on a Citroen C3: pull the lever located at the bottom left of the dashboard, then s…
How to Open the Bonnet on Citroen C3
Citroen C3 (2016-2023 / SY, SX) How to perform maintenance on a Citroen C3? Here’s how to open the bonnet: pull the lever located at the bottom left of the dashboard, then slightly …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos