Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to open the front hood of a Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 SX, SY - Years 2016-2023
Part: Cabin air filter
Operation: How to open the front hood of a Citroen C3

Do we want to open the engine compartment of the Citroen C3? Let's see how the front hood is raised to carry out maintenance inside the compartment. We pull the lever located at the bottom left of the dashboard, then, slightly raise the engine hood and unlock the locking lever. Once the engine hood is unlocked, lift it up and secure it with the locking rod. Now that we have opened the bonnet we can do the maintenance. We remove the safety rod and drop the hood down from a minimum height for closing. We lock the engine hood.


Posted on 18 January 2024 by ScegliAuto

    Frequently Asked Questions

    • C3 2002-2009 - Where is the Citroen C3 cabin air filter located? Read Answer
    • C3 2009-2016 - Where is the cabin filter of the Citroen C3 II? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos