|
Do it yourself
| |||
| ||||
How to Replace the Key Battery on a Citroen
Model: Citroen C3
Pluriel
- Years 2003-2010
On Citroen vehicles, the key fob uses a shell that opens with a small catch. To work neatly, open the key blade and locate the groove on the edge of the remote, near the end. Gently insert a small cutting tool (preferably plastic, or a very thin screwdriver) and give a slight twist to unclip the clips without forcing: the goal is to separate the two shells without marking the plastic. Once the Citroen remote is open, access the battery compartment: the visible battery is a CR2032 3V. Before replacing it, check the polarity indicated (the “+” must remain in the same direction during reassembly). If you need to remove the battery, avoid prying on the metal contacts with force: it’s better to act on the edge of the battery just enough to free it from the holder, and then insert the new CR2032 respecting the orientation. Close the Citroen key shell by aligning the two sides and pressing until you hear the clips engage. Finally, check that the key opens/closes correctly and that the remote buttons work.
Posted on 5 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Citroen C3
(2016-2023 /
SY, SX)
Let's see in today's tutorial how to replace the battery of a 2021 Citroen C3 key. The operation is very simple to do and we can do it entirely on ou…
Citroen C3
(2016-2023 /
SY, SX)
To replace the battery in the key of your Citroen C3 latest model by yourself, simply follow the steps outlined in this new guide dedicated to you. F…
Citroen C3
(2002-2009 /
FC, FN)
How to change the battery of a Citroen C3 key? Let's see how to disassemble the C3 key battery. Take your remote key and, using a screwdriver, unscre…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.139
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |