Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Spark Plugs in a Citroen C3 VTi 82 hp

Model: Citroen C3 SC - Years 2009-2016
Part: Spark plugs

Do you need to replace the spark plugs in your three-cylinder Citroen? You’re in the right place; here are practical tips to do it quickly. After parking the car safely, open the bonnet using the lever in the cabin. Do not work with the engine having been off for long. Access the engine and disconnect the connectors from the spark plug leads using the tabs. Unscrew the bolt and remove the lead. Next, loosen and take out the spark plug, being careful not to let anything fall into the engine. Now you can screw in the new part. Continue with the others. It is advisable to proceed one at a time to avoid dirt falling into the engine and damaging it.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the oil pump of the Citroen C3 1.2 VTI
Guide to replacing the oil pump of the Citroen C3 1.2 VTI
Citroen C3 (2009-2016 / SC) Today's guide will show you the main steps to remove and replace the faulty oil pump of the Citroen C3 1.2 VTI. The oil pump replacement operation is…
How to Replace Spark Plugs in a Citroen C3
How to Replace Spark Plugs in a Citroen C3
Citroen C3 (2009-2016 / SC) In this video, you will learn how to remove and replace the spark plugs in a Citroen C3 (the procedure is similar for other Citroen and Peugeot model…
Replacing Spark Plugs on C3
Replacing Spark Plugs on C3
Citroen C3 (2002-2009 / FC, FN) Replace the damaged spark plugs on a Citroen C3. First, lift the bonnet, then locate the bar where the coils are situated. Disconnect the coils from …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos