Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Gear Knob on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Shift knob

Do you want to replace the gear knob on your Citroen C3? Follow these steps. Remove the plastic trim (leather gaiter with the surrounding frame) from the centre console (where the window switch buttons are) using a lever. Then, grasp the gear knob with your hands and pull it upwards until it disconnects from the shaft (disconnect the power connectors). To install the new knob: slide the gaiter with the plastic frame onto the shaft in the centre console; fit the new gear knob and tighten it. Finally, reattach the plastic trim over the centre console.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2002-2009 / FC, FN) To replace the gear knob on a Citroen C3, follow this procedure: first, detach the plastic around the gear lever, then pull upwards to reach the clip…
Citroen C3 (2002-2009 / FC, FN) This guide will show you the main steps to remove and replace the gear knob on a Citroen C3. First, get inside the vehicle and start by removing the …
Citroen C3 (2009-2016 / SC) Today, you will learn how to replace the gear knob and gaiter on your Citroen C3. First, remove the gaiter that covers the gear knob by pulling the s…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos