Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Citroen Berlingo Van?

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, see how to replace the cabin filter in a Citroen Berlingo van, a very simple and quick operation. First, go to the passenger side, then remove the panel located at the junction between the dashboard and the centre tunnel by unscrewing the relevant screw.

Next, also remove the lower cover of the glove compartment, locate the rectangular door and open it by unlocking the clip. At this point, simply extract the old filter, clean the housing of any dirt residue, insert the new filter, and reassemble everything by following the reverse procedure.


Posted on 3 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service on the Citroen Berlingo Van?
How to Reset the Service on the Citroen Berlingo Van?
Citroen Berlingo (2008-2018 / MK 2) In this tutorial, you will see how to reset the service on the Citroen Berlingo van, a very simple and quick operation to perform only after completi…
How to reset the service in the Citroen Berlingo van?
How to reset the service in the Citroen Berlingo van?
Citroen Berlingo (2018-2026 / MK 3) In this tutorial, we can see how to reset the service in the Citroen Berlingo van, an extremely simple and quick operation, to be carried out only on…
How to reset the service light on the Citroen Berlingo van?
How to reset the service light on the Citroen Berlingo van?
Citroen Berlingo (2008-2018 / MK 2) In this tutorial, you will see how to reset the service light on the Citroen Berlingo van, a very simple and quick operation to perform only after co…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos