Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the ABS Sensor on a Citroen C3

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

See other generations:
Video tutorial

How to remove the ABS sensor on a Citroen C3? Position your car on a column lift and raise it to a comfortable height for working. Unscrew the wheel bolts with a socket wrench and (using an air drill) remove the wheel.

Start unscrewing the securing bolts of the ABS sensor (located above the brake disc as shown in the video). Use a screwdriver to detach the clips holding the wiring.

Remove the plastic splash guard and (as shown in the video) disconnect the power connectors inside the wheel arch. Finally, connect the new ABS sensor and refit the wheel with the associated bolts.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to remove the coolant temperature sensor on a Citroen C3
How to remove the coolant temperature sensor on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Before you start, open the front bonnet of your Citroen C3. The sensor is located near the left side of the cylinder head. This procedure should be c…
Guide to Replacing the Temperature Sensor on the Citroen C3 1.4i
Guide to Replacing the Temperature Sensor on the Citroen C3 1.4i
Citroen C3 (2002-2009 / FC, FN) In this short and simple guide, you will find the necessary instructions to remove and replace the coolant temperature sensor on the Citroen C3 1.4i.…
Guide to Replacing the Oil Pressure Sender on a Citroen C3
Guide to Replacing the Oil Pressure Sender on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) This brief guide shows how to remove and replace the oil pressure sender on a Citroen C3, following the instructions below. First, open the bonnet an…

    Frequently Asked Questions

    • C3 2002-2009 - Where is the horn located in the Citroen C3? Read answer
    • C3 2009-2016 - What to do in case of malfunction of the external temperature sensor in the Citroen C3? Read answer
    • C3 2009-2016 - How many reversing lights does the Citroen C3 have? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos