Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wheel Replacement on Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Wheel

Is the wheel of your Citroen Berlingo punctured? Do you want to replace it? Here’s how to change the wheel. Position the jack under the jacking point of the vehicle (under the stiffest part of the chassis to avoid bending the metal due to excessive weight), lift the car slightly, and loosen the wheel nuts. Now raise the car with the jack lever, unscrew the nuts, and pull the wheel off the hub. Fit the spare wheel onto the hub with the respective nuts (retrieve the spare wheel from the boot). Always remember to store the fitting kit with all its parts in the boot. Repair the damaged tyre.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing and Replacing the Spare Wheel on the Citroen Berlingo/Peugeot Partner
Removing and Replacing the Spare Wheel on the Citroen Berlingo/Peugeot Partner
Citroen Berlingo (1996-2013 / MK 1) In this tutorial video, you will see how to remove the spare wheel and replace it on the Citroen Berlingo first generation, as well as on the Peugeot…
How to Replace the Timing Belt on the Citroen Berlingo 1.6 HDI
How to Replace the Timing Belt on the Citroen Berlingo 1.6 HDI
Citroen Berlingo (2008-2018 / MK 2) In this video tutorial, we will see how to replace the timing belt on the second series Citroen Berlingo, as well as on the Peugeot Boxer, with a 1.6…
How to Replace the Alternator on a Citroën Berlingo?
How to Replace the Alternator on a Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To replace the alternator on a Citroën Berlingo, lift the vehicle so that the corresponding front wheel is not in contact with the ground: after the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos