Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat on Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Seat

Video tutorial

Replacing the front seat of the Citroen Xsara Picasso? Removing the seat from above the rail is not difficult. Lift the seat forward and remove the protective plastics around the seat frame (unscrew the securing screws if present).

Use a socket spanner to unscrew the securing screws on the front rail and remove the securing pins from the back of the frame. Disconnect the damaged seat from above the rails and take it out of the vehicle (disconnect the electrical connectors).

Fit a new seat inside the car and screw in all the associated screws (cover with the trim plastic).


Updated on 20 March 2026 by ScegliAuto


Related tutorials

How to disassemble and repair the armrest of the Citroen Xsara Picasso.
How to disassemble and repair the armrest of the Citroen Xsara Picasso.
Citroen Xsara Picasso (1999-2012 / MK 1) In this brief guide, we will see the main instructions on how to disassemble and replace the armrest of the driver's seat of the Citroen Xsara Picass…
How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
Replacing the Battery on a Citroen Xsara Picasso
Replacing the Battery on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Do you want to remove the battery from the Citroen Xsara Picasso? Here’s how to take out the battery from the Citroen. Open the car door and lift the…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos