Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Battery

Video tutorial

Do you want to remove the battery from the Citroen Xsara Picasso? Here’s how to take out the battery from the Citroen. Open the car door and lift the driver’s seat; the battery is underneath it (in other cars, it is usually located in the engine bay). Unscrew the bolts securing the seat above the sliding rails.

Remove the seat, then the plastic cover of the battery. Use a socket wrench to unscrew the securing bolts of the battery terminals.

Remove the old battery using the plastic handle and install a new one, tightening the power terminals. Close the battery compartment and refit the previously removed seat.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Replacing the Battery in a Citroen Xsara Picasso
Replacing the Battery in a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Replace the vehicle's power battery? Remove the power battery in a Citroen Xsara Picasso. Open the car door and lift the driver's seat; the battery i…
Battery Replacement on the Citroen Xsara Picasso 2.0 HDI
Battery Replacement on the Citroen Xsara Picasso 2.0 HDI
Citroen Xsara Picasso (1999-2012 / MK 1) Below are the instructions to remove and replace the battery of the Citroen Xsara Picasso 2.0 HDI. First, open the bonnet of your car and start unscr…
Removing the Battery from a Citroen Xsara Picasso
Removing the Battery from a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) How to replace the battery in a Citroen Xsara Picasso? This video explains how to remove the battery. Open the car door and lift the driver's seat; t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos