Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement on the Citroen Xsara Picasso 2.0 HDI

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Battery

Below are the instructions to remove and replace the battery of the Citroen Xsara Picasso 2.0 HDI. First, open the bonnet of your car and start unscrewing the bolts of the battery's central bracket using a socket spanner. Then, disconnect both battery terminals (positive and negative) to remove it from its compartment, as shown in the video. Now, install the new battery, of the correct type and with the same amperage, making the electrical connections and refitting the central locking bracket!

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Clutch on Citroen Xsara Picasso 2.0 HDi
Replacing the Clutch on Citroen Xsara Picasso 2.0 HDi
Citroen Xsara Picasso (1999-2012 / MK 1) Below are the instructions that will allow you to remove and replace the clutch on the Citroen Xsara Picasso 2.0 HDi. First, open the vehicle's bonne…
Removing the Fuel Pump from the Citroen Xsara Picasso 2.0 HDi
Removing the Fuel Pump from the Citroen Xsara Picasso 2.0 HDi
Citroen Xsara Picasso (1999-2012 / MK 1) The instructions in this guide show how to remove and replace the fuel pump of the Citroen Xsara Picasso 2.0 HDi. First, open the tailgate and remove…
Replacement of the clutch cable of the Citroen Xsara Picasso 2.0 HDI
Replacement of the clutch cable of the Citroen Xsara Picasso 2.0 HDI
Citroen Xsara Picasso (1999-2012 / MK 1) Today's main instructions will guide us through the process of disassembling and replacing the clutch cable of the Citroen Xsara Picasso 2.0 HDI. In …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos