Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to replace the indicator bulb in the headlight of the Citroen C3.

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: Light bulb
Operation: How to replace the indicator bulb in the headlight of the Citroen C3.

To replace the direction indicator bulb, located in the headlight unit, of the Citroen C3, we must first open the front hood of the engine compartment to be able to access the rear part of the headlight unit in which it is The bulb to be replaced is positioned. We remove the cover, which protects the electrical contacts, from water and humidity, by moving the spring that locks it in place and thus we have access to the direction indicator bulb. To remove it, it is necessary to rotate it anticlockwise and remove it from its seat. We replace it with a new bulb and reassemble everything following the operations seen but proceeding backwards.


Posted on 12 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C3 2009-2016 - What to do if the reverse lights on your Citroen C3 don't work? Read Answer
    • C3 2016-2023 - What does the Citroen C3 3rd Gen LED fog light anomaly warning light mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos