Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the headlight of the Citroen C1

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Headlight

Remove the rear light of the Citroen C1? We lift the tailgate and begin the dismantling of the light. Unscrew the tightening screws on the side of the headlight (right) with a screwdriver. We detach the rear light from its housing once all the screws have been removed (remove the power supply terminals) and replace the damaged bulbs with new ones (size and voltage equal). We fix the headlight after connecting the power terminals. We screw the clamping screws to the side of the headlight. We test the correct functioning of the bulbs by turning on the lights with the control levers.

Posted on 23 September 2020 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front headlight bulb of the Citroën C1?
How do you replace the front headlight bulb of the Citroën C1?
Citroen C1 (2014-2022 / MK 2) In order to replace the headlight bulb of the Citroën C1, you need to open the hood so that you have access to the inside of the headlight assembly: …
How do you replace the front headlight bulb of the Citroën C1?
How do you replace the front headlight bulb of the Citroën C1?
Citroen C1 (2005-2014 / MK 1) The replacement of the front headlight bulb on the Citroën C1 is done by opening the hood, so that access can be gained to the components located ins…
How do you replace the headlight bulb of the Citroën C1?
How do you replace the headlight bulb of the Citroën C1?
Citroen C1 (2005-2014 / MK 1) The headlight bulb of the Citroën C1 can be replaced by opening the hood, so that it is possible to have access to the components located inside the …

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos