Engine Oil and Filter Replacement

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Engine oil

See other generations:

This video is currently unavailable

Using a ratchet wrench, gently unscrew the oil filter and remove it from its housing. Obtain the correct quantity of oil suitable for your engine type.

Lift the car with appropriate jacks and secure it with suitable supports to prevent it from falling, allowing you to work safely. Place a plastic sheet and an oil collection tray under the engine.

Unscrew the oil plug on the sump and let it drain. Replace the used filter cartridge with a new one, also replacing the O-ring gasket.

Close the oil plug, refit the oil filter, and top up with new oil. After a test drive, check the oil level again. Do not dispose of used oil in the environment; take it to designated collection centres.

Updated on 5 February 2026 by ScegliAuto

Other guides you may be interested in

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

Engine Oil - Maintenance and repair on other vehicles

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!

by ScegliAuto

Engine Oil and Filter Replacement

Related tutorials

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

More videos