Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Engine Filter Replacement

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Engine oil

See other generations:
This video is currently unavailable

If possible, position the vehicle on suitable car ramps to facilitate access to the oil sump. Then, remove the plastic cover located beneath the engine bay and locate the oil sump drain plug; place a container for collecting the used oil and unscrew the drain plug; re-screw it once the draining is complete, replacing the sealing washer if necessary.

Next, locate the oil filter cartridge: it is positioned laterally, just above the gearbox. Replace the filter cartridge and the sealing rings that are always included in the kit, and fill the engine with new oil according to the SAE specifications and the quantities indicated in the user and maintenance manual.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Citroen C4 Picasso (2006-2013 / MK 1) Lift the car with appropriate jacks and secure it with suitable supports to prevent it from falling. Place a plastic sheet and an oil collection pan …
Engine Oil and Filter Replacement
Citroen C4 Picasso (2006-2013 / MK 1) Using a ratchet wrench, gently unscrew the oil filter and remove it from its housing. Obtain the correct quantity of oil suitable for your engine typ…
How to Replace the Oil Filter and Engine Oil on a Citroen C4 Picasso
How to Replace the Oil Filter and Engine Oil on a Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Replacing the engine oil and oil filter is a straightforward and quick task that you can do yourself on a Citroen C4 Picasso. First, open the front b…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos