Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Oil Filter Replacement on Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Oil filter

See other generations:
Video tutorial

Lift the bonnet and insert the support rod. Raise the car with one or two jacks (one on each side) and remove the panel under the engine bay by unscrewing all the bolts that secure it (before doing this, you need to unscrew part of the panel near the bumper to move it). Unscrew the drain plug as shown in the video and collect the used oil in a container.

To replace the filter, access it from the bonnet and remove the air duct obstructing access.

Once done, simply unscrew it and insert the new one. Pour in the new oil through the designated opening.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Warning Light on Citroen Berlingo
How to Reset the Oil Warning Light on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this very short video tutorial, see how to reset the engine oil maintenance warning light on a Citroen Berlingo, model produced from 2008 to 2018.…
Replace the diesel filter on a Citroen Berlingo
Replace the diesel filter on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Replacing the diesel filter on a Citroen Berlingo? Let's look at removing the diesel filter in the engine bay. Lift the front bonnet and locate the d…
How to reset the oil change indicator light on the Citroën Berlingo
How to reset the oil change indicator light on the Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) The reset of the oil change warning light on a Citroen Berlingo vehicle follows simple steps and can be done independently. To reset the warning ligh…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos