Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil change indicator light on the Citroën Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Service warning light

The reset of the oil change warning light on a Citroen Berlingo vehicle follows simple steps and can be done independently. To reset the warning light, we need to get into the vehicle and turn on the ignition while keeping the instrument panel on and the key inserted in the ignition switch. Press the button with the wrench symbol located on the left side of the instrument panel display. Hold down the button until the countdown is finished and the mileage for the next oil change is updated. If the mileage is not updated for the next oil change, it is necessary to check the operation of the oil tank sensor.

Posted on 20 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Warning Light on Citroen Berlingo
How to Reset the Oil Warning Light on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this very short video tutorial, see how to reset the engine oil maintenance warning light on a Citroen Berlingo, model produced from 2008 to 2018.…
How to reset the service light on the 2011 Citroen Berlingo
How to reset the service light on the 2011 Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Today we will explain how to reset the service light of the 2011 Citroen Berlingo after performing a car service or changing the engine oil. To reset…
How to reset the 2008 Citroen Berlingo
How to reset the 2008 Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) On the 2008 Citroen Berlingo vehicles, to reset the service light, we need to turn on the instrument panel by inserting the key into the ignition swi…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos