Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to replace the oil filter in the Citroen C3?

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Oil filter
Operation: How to replace the oil filter in the Citroen C3?

In this tutorial we can see how to replace the oil filter in the Citroen C3, a very simple operation, to be carried out together with the oil change itself. First make sure the engine is completely cold, then open the top filler cap, remove the dipstick and unscrew the filter housing with a 27mm socket wrench. Once this is done, let's go underneath the vehicle, locate the bolt of the bleed hole and unscrew it, so as to let out all the oil contained in the engine. Finally, tighten the bolt, insert the replacement filter together with a new gasket and introduce new oil through the upper hole.


Posted on 16 April 2023 by ScegliAuto

    Frequently Asked Questions

    • C3 2016-2023 - Where is the Citroà «n C3 oil filter located? Read Answer
    • C3 2002-2009 - Where is the oil filter of the Citroen C3 diesel 1.4 hdi? Read Answer
    • C3 2002-2009 - Where is the Citroen C3 diesel oil filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos