Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Heater Fan on Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Blower motor

In this tutorial, you will learn how to remove the cabin heater fan from a Citroen Berlingo. First, remove the plastic cover located on the passenger side and take out the clips found at the bottom: then remove the trim to gain access to the heater motor. Disconnect the electrical connector from the fan and unscrew the fixing screws that hold it in place. Then, extract the fan; replace it with a new one, ensuring it is the correct model. Refit the new fan, securing the screws and reconnecting the electrical connector!

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Fan Resistor on a Citroën Berlingo
Replacing the Cabin Fan Resistor on a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this guide, we will see the main instructions on how to remove and replace the cabin fan on a Citroën Berlingo. First, get inside the cabin and st…
Guide to Removing the Heater Radiator of the Citroen Berlingo
Guide to Removing the Heater Radiator of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) This guide provides the main instructions on how to remove and replace the heater radiator of the Citroen Berlingo's cabin. First, get inside the veh…
Guide to Removing the Cabin Heater Radiator of the Citroen Berlingo
Guide to Removing the Cabin Heater Radiator of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) This guide provides instructions to remove and replace the cabin heater radiator of the Citroen Berlingo. First, open the bonnet of your car and star…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos