Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan Resistor on a Citroën Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
Video tutorial

In this guide, we will see the main instructions on how to remove and replace the cabin fan on a Citroën Berlingo. First, get inside the cabin and start by removing the plastic cover located at the bottom on the passenger side; the resistor is found next to the cabin fan. Unscrew the fixing screws and disconnect the electrical connector to remove it, as shown in the video.

At this point, carry out the repair or replacement of the fan, reconnecting it; then check the operation of the fan at various speeds.


Posted on 22 August 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan Resistor on a Citroën Berlingo
How to Replace the Cabin Fan Resistor on a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) The cabin fan on a Citroën Berlingo is located inside the cabin, specifically behind the left dashboard. The cause of the fan not working is the fail…
How to change the fan resistor of a Citroen Berlingo
How to change the fan resistor of a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this video, we see how to change the fan resistor of a Citroen Berlingo: the fan only works at maximum speed, so it is necessary to change the res…
How to Replace the Cabin Fan in a Citroën Berlingo
How to Replace the Cabin Fan in a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) To replace the cabin fan in a Citroën Berlingo, first detach the carpet from the footwell on the passenger side, then remove the corresponding glove …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos