Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Resistor on a Citroën Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Blower motor

The cabin fan on a Citroën Berlingo is located inside the cabin, specifically behind the left dashboard. The cause of the fan not working is the failure of the resistor. To replace the resistor, you need to remove the front dashboard using a plastic trim removal tool to avoid scratching it. Also, remove the centre console. Once you have access inside the dashboard, remove the fan by unscrewing the screws on the sides and the central nut, being careful not to damage the fan, and disconnect the connector. To remove the resistor, disconnect the wires connected to the fan and the connector, then unscrew the screws and extract it. Reassembly follows the reverse procedure; it is very important to perform this operation with the battery disconnected to prevent damage to the fan.

Posted on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Fan Resistor on a Citroën Berlingo
Replacing the Cabin Fan Resistor on a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this guide, we will see the main instructions on how to remove and replace the cabin fan on a Citroën Berlingo. First, get inside the cabin and st…
How to Replace the Cabin Fan in a Citroën Berlingo
How to Replace the Cabin Fan in a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) To replace the cabin fan in a Citroën Berlingo, first detach the carpet from the footwell on the passenger side, then remove the corresponding glove …
How to change the fan resistor of a Citroen Berlingo
How to change the fan resistor of a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this video, we see how to change the fan resistor of a Citroen Berlingo: the fan only works at maximum speed, so it is necessary to change the res…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos