Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the fan resistor of a Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Checks and maintenance

In this video, we see how to change the fan resistor of a Citroen Berlingo: the fan only works at maximum speed, so it is necessary to change the resistor. This video is a step-by-step guide, so we need to go to the right side of the vehicle and look for the cover - in this case above the pedals - held by clips, we remove it and highlighted by a large two-tone cable we find our resistor; we disconnect the connector, remove the holding screws, and remove it. We can find the replacement part for example on auto-doc. It with the code LTD-55702407, priced at 13.32 euros + 9.90 euros for delivery. We replace it by putting back the screws and the connector, put back the protective panel, and the job is done.

Posted on 3 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Fan Resistor on a Citroën Berlingo
Replacing the Cabin Fan Resistor on a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this guide, we will see the main instructions on how to remove and replace the cabin fan on a Citroën Berlingo. First, get inside the cabin and st…
How to Replace the Cabin Fan Resistor on a Citroën Berlingo
How to Replace the Cabin Fan Resistor on a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) The cabin fan on a Citroën Berlingo is located inside the cabin, specifically behind the left dashboard. The cause of the fan not working is the fail…
Replacement of the fan resistors on Citroen Berlingo MK2
Replacement of the fan resistors on Citroen Berlingo MK2
Citroen Berlingo (2008-2018 / MK 2) In this video, we will see what the problem is with the cabin fan that only works at maximum speed on a Citroen Berlingo (or Peugeot Partner); if the…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos