Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the fan resistors on Citroen Berlingo MK2

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Blower motor

See other generations:
Video tutorial

In this video, we will see what the problem is with the cabin fan that only works at maximum speed on a Citroen Berlingo (or Peugeot Partner); if the fan does not work at intermediate speeds, the responsibility lies with the damaged resistor. We can find it at a great price on AliExpress with the code 1005006140681859 for 6.95 euros each, with free delivery.

We recommend checking the compatibility of the part with your vehicle carefully. It is located on the floor, under the accelerator pedal, above the small switch that we can see in the video: it is a very small location, but it has the advantage of being plug & play, so it just needs to be replaced.


Posted on 4 February 2025 by ScegliAuto


Related tutorials

Replacing the Cabin Fan Resistor on a Citroën Berlingo
Replacing the Cabin Fan Resistor on a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this guide, we will see the main instructions on how to remove and replace the cabin fan on a Citroën Berlingo. First, get inside the cabin and st…
Where are the fuses located in the Citroën Berlingo?
Where are the fuses located in the Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) In the Citroën Berlingo, all fuses are located within dedicated fuse boxes installed in the vehicle: this type of vehicle has two fuse boxes. The fir…
How to Replace the Cabin Fan Resistor on a Citroën Berlingo
How to Replace the Cabin Fan Resistor on a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) The cabin fan on a Citroën Berlingo is located inside the cabin, specifically behind the left dashboard. The cause of the fan not working is the fail…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos