Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan in a Citroën Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Blower motor

See other generations:
Video tutorial

To replace the cabin fan in a Citroën Berlingo, first detach the carpet from the footwell on the passenger side, then remove the corresponding glove compartment: to do this, open it and unscrew the fixing screws located inside. Once the glove compartment is removed, you will locate the fan at the back: unscrew the fixing screws and disconnect the power cables, allowing you to remove the old cabin fan from its housing and replace it with a new one.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How do you replace the cabin fan of the Citroën Berlingo?
How do you replace the cabin fan of the Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To replace the cabin fan of the Citroën Berlingo, you will need to remove the dashboard by loosening the screws that hold the panels in place, especi…
How to Replace the Cabin Fan Resistor on a Citroën Berlingo
How to Replace the Cabin Fan Resistor on a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) The cabin fan on a Citroën Berlingo is located inside the cabin, specifically behind the left dashboard. The cause of the fan not working is the fail…
Replacement of the fan resistors on Citroen Berlingo MK2
Replacement of the fan resistors on Citroen Berlingo MK2
Citroen Berlingo (2008-2018 / MK 2) In this video, we will see what the problem is with the cabin fan that only works at maximum speed on a Citroen Berlingo (or Peugeot Partner); if the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos