Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cabin fan of the Citroën Berlingo?

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Blower motor

See other generations:
Video tutorial

To replace the cabin fan of the Citroën Berlingo, you will need to remove the dashboard by loosening the screws that hold the panels in place, especially on the driver's side. Once these panels have been removed, you will be able to locate the cabin fan in the rear area compared to the pedals.

You will need to loosen the screws that hold it in place so that you can disconnect the connectors as well: at this point, you can position the new fan in its place, so that you can verify that everything is working.


Posted on 31 December 2024 by ScegliAuto


Related tutorials

Replacing the Cabin Fan Resistor on a Citroën Berlingo
Replacing the Cabin Fan Resistor on a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this guide, we will see the main instructions on how to remove and replace the cabin fan on a Citroën Berlingo. First, get inside the cabin and st…
How to Replace the Cabin Fan in a Citroën Berlingo
How to Replace the Cabin Fan in a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) To replace the cabin fan in a Citroën Berlingo, first detach the carpet from the footwell on the passenger side, then remove the corresponding glove …
Removing the Cabin Heater Fan on Citroen Berlingo
Removing the Cabin Heater Fan on Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) In this tutorial, you will learn how to remove the cabin heater fan from a Citroen Berlingo. First, remove the plastic cover located on the passenger…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos