Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Open the Bonnet of a Citroen C1

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Body

In today's video, you will learn how to open the bonnet of a Citroen C1; opening the bonnet is really very simple and requires no tools: however, it may seem a bit more complicated than expected for some. First, pull the lever inside located at the bottom on the driver's side; at this point, the bonnet will be open but not fully: insert your fingers roughly in the centre of the bonnet and lift the lever to fully open the bonnet, as shown in the video. Now, secure it with the prop rod!

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet of a Citroen C1
How to Open the Bonnet of a Citroen C1
Citroen C1 (2005-2014 / MK 1) Let’s see in this video how to open the front bonnet on a Citroen C1. Pull the lever located at the bottom left of the dashboard, then lift the bonne…
How do you open the hood of the Citroen C1?
How do you open the hood of the Citroen C1?
Citroen C1 (2005-2014 / MK 1) The hood of the Citroen C1 is no different from that of other cars, in fact, the opening mode is identical, in fact, it could be defined as standard.…
How to Open the Bonnet on Citroen C1
How to Open the Bonnet on Citroen C1
Citroen C1 (2014-2022 / MK 2) Have you recently got a new car? Here’s how to open the bonnet for topping up the reservoirs: pull the lever located at the bottom left of the dashbo…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos