Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Lock Cylinder of a Citroen C4

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Door lock

In this video, you will see how to remove the front door lock of a first-generation Citroen C4 by following these simple instructions. First, open the front door and remove the small side plastic cap; then, using something pointed and thin, perhaps a long screwdriver, lever the lock outwards as shown in the video. At this point, simply replace the lock with a new one if necessary; apply the reverse procedure for reassembling the lock, ensuring it is properly secured!

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Lock Cylinder on a Citroen C4
How to Replace the Lock Cylinder on a Citroen C4
Citroen C4 (2004-2010 / MK 1) In this video, you will learn how to replace the lock cylinder on the driver's door of a first series Citroen C4. Open the door you want to fix and s…
Removing the Door Handle on Citroen C4
Removing the Door Handle on Citroen C4
Citroen C4 (2010-2018 / MK 2) In this video tutorial, learn how to remove the door handle of a Citroen C4, as well as on other models from the French manufacturer. First, open the…
How to Replace the Tailgate Lock on the Citroen C4
How to Replace the Tailgate Lock on the Citroen C4
Citroen C4 (2004-2010 / MK 1) This guide provides the main instructions for removing and replacing the tailgate lock on the Citroen C4. First, open the boot and start removing the…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos