Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lock Cylinder on a Citroen C4

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Door lock

In this video, you will learn how to replace the lock cylinder on the driver's door of a first series Citroen C4. Open the door you want to fix and start the job. Remove the rubber plug on the side of the door and then remove the bolt using the appropriate tool (a Torx screwdriver is ideal). Now pull out the housing containing the lock and repair or replace it with a new one based on your needs and the situation. As you can see, this is a very simple and quick job that will take you less than a minute.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Lock Cylinder of a Citroen C4
Removing the Lock Cylinder of a Citroen C4
Citroen C4 (2004-2010 / MK 1) In this video, you will see how to remove the front door lock of a first-generation Citroen C4 by following these simple instructions. First, open th…
How to Replace the Tailgate Lock on the Citroen C4
How to Replace the Tailgate Lock on the Citroen C4
Citroen C4 (2004-2010 / MK 1) This guide provides the main instructions for removing and replacing the tailgate lock on the Citroen C4. First, open the boot and start removing the…
Replacing the Door Lock on Front Door of Citroen C4
Replacing the Door Lock on Front Door of Citroen C4
Citroen C4 (2004-2010 / MK 1) Replacing the door lock on your car is not a complicated task. First, detach the external plastic handle by prying it off with a flat screwdriver or …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos