Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Discs and Pads on a Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Brake rotors

See other generations:
Video tutorial

Unscrew the bolts for the wheel where you intend to replace the disc, lift the car with a jack, and remove the wheel. Unscrew the bolts located behind the brake caliper using a 13mm spanner and detach it. Retract the piston using your preferred tool, such as a large screwdriver or a clamp.

Remove the support by unscrewing the two T27 Torx screws. Take out the brake pads and then the support.

At this point, you can also remove the disc by unscrewing its screws. For reassembly, follow the reverse order: first, fit the disc, then the pads and support, and finally the caliper.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Replacing the Rear Brake Pads on a Citroen C4 Picasso
Replacing the Rear Brake Pads on a Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Replacing the rear brake pads on a Citroen C4 Picasso? Here’s how to do it. Lift the car on a column lift to the desired height, then remove the whee…
Removing Brake Pads on C4 Picasso
Removing Brake Pads on C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) How to replace the front brake pads on a Citroen C4 Picasso? Lift the car and remove the wheel using a telescopic spanner. Identify the caliper that …
Replacing the Rear Brake Pads on Citroen C4 Picasso
Replacing the Rear Brake Pads on Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) After removing the affected rear wheel by unscrewing the bolts and lifting the vehicle, use a medium-large flathead screwdriver to push back the brak…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos